Eagtac SX25L2 Turbo
Tired of that dim patrol light? This direct rechargeable duty light is versatile with three brightness settings quickly adjusted with a twist. At its high level this light is extremely bright and throws great focused light much further than others in its class.
INCLUDES BOTH WALL AND CIGARETTE CHARGERS AND MOLDED NYLON OPEN TOP/BOTTOM HOLSTER AND NO ADDITIONAL COST (24.99 VALUE)
2.5 inches (62 mm)
1.2 inches (31 mm)
9.9 inches (252 mm)
18.8 ounces (535 grams)1
2x26650 li-ion battery pack (included)
Only use the built-in charger to charge EAGTAC original 7.4V battery pack
2.7V - 8.4V
SX25L2 Turbo flashlight
7.4V li-ion battery pack (R33) and spare waterproof charging cap
Built-in li-ion rechargeable port, 7.4V li-ion battery pack (R33), battery isolation disk
rigid nylon holster w/ self-retention device, 18W wall charger AC-DC adapter (US/EUR), Automobile 12V DC cigarette lighter charger
IC protected, prevents over-charge, over-discharge, short circuit
7.4V li-ion battery pack (R33)
4500mAh capacity, 33.3Wh
Accessories / Spare parts
7.4V li-ion Battery packs (R33)
Miniature AC-DC adapter7
100V-240V to 10V@1.8A, 18Watts
US version - UL certified, PSE certified
European version - TUV/CE certified
12V Automobile DC adapter
Regular (SX25L2) reflector head w/ protective end cap
YGRB filter and diffuser filter
CREE XM-L2 U2 LED
LED lumen: 1305
ANSI FL-14 lumen: 1049
Center lux: 61,900 lux
Center spot angle: 5.7°
Spill light angle: 53.1°
Beam distance: 544 yards / 498 meters
Waterwhite glass lens w/ harden treatment
Anti-reflective (AR) coating on both side (96% transparency)
Synchronous buck w/ efficiency of up to 95%
Non-dimming constant current regulation for all output levels
Very low standby current (uA)
Turbo boost technology5
Highly efficient buck switch
Accepts input from 10V to 12V
Compatible with 12V automobile DC socket
Constant current and constant voltage charging method
Fast charge to 41% in one hour (R33)
Three hours safety timer w/ charging indicator (more)
Smooth aluminum reflector
HAIII hard anodization aerospace aluminum
Output and Runtime
Four brightness levels (Regular mode)
Led lumen: 13055-1159/636/120/10
ANSI FL-1 lumen: 10495-932/522/98/9
Runtime: 2.7/7.2/44/200+ hours (R33)
Two brightness levels (Tactical mode)
Led lumen: 13055-1159/200/Strobe I/Strobe II
ANSI FL-1 lumen: 10495-932/164/Strobe I/Strobe II
Runtime: 2.7/26 hours (R33)
XM-L2 T6 neutral white LED has approximately 7% less output lumen compared to U2 LED.
Seven hidden auxiliary outputs7
Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
For momentary on, press and hold the button switch for immediate output.
Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd (or 4th level) and tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
Advance (Programmable Features) To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for five times within five seconds.
Rigid nylon holster w/ retention device
User replaceable glass lens
Turbo boost technology
Battery reverse polarity protection
Upgradeable turbo-size head and reflector
Ten years performance guaranteed warranty
Read flashlight regular maintenance