Menu
Cart 0

Eagtac D25C Clicky

  • $58.99


One of the most powerful single cr123 battery flashlights available!

Free shipping lower 48

Maximum lumen output
LED lumen
XM-L2 U2: 4531/296/33/1
XP-G2 S2: 4081/268/37/1
Nichia 219 (CRI-92): 3001/268/37/1
ANSI FL-12 lumen
XM-L2 U2: 3171/210/24/0.5
XP-G2 S2: 2721/179/25/0.5
Nichia 219 (CRI-92): 2001/129/16/0.5

Turbo boost technology
1) Turbo boost technology is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode.

2) ANSI FL-1 is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC ANSI FL-1 Lumen output is measured using a calibrated integrated sphere three minute after turning on the flashlight.

Top binned LED

Cool White LED
CREE XM-L2 U2 LED

XM-L2, XP-G, CREE are registered trademark of CREE Inc. Nichia, 219 are registered trademark of Nichia.

Color tint selection
Cool White LED
This gives you the maximum brightness output in its class and maximum beam distance.

CREE XM-L2 U2 LED
453 ANSI lumen, Fair far projecting performance, excellent (relatively floody) beam profile

Offers up to 750 LED lumen when direct drive with 16340 li-ion battery.

Nichia 219A SW45 D220 LED


Nichia 219 is currently the only one in the market that offers high 92 CRI in neutral white tint of 5000K. The 219 LED offers very nice smooth beam and gives you the best illuminated object color. We use the highest flux D220 for maximum output.

High output that you can count on
This circuit survives the toughest torture environment including: 1) repeatedly over-night burn-in test, 2) over input voltage test, 3) over-driven output current test, and 4) high temperature oven test.

We designed this circuit to offer extreme output performance, while maintaining reasonable amount of headroom. Thus making this flashlight one of the top performer with a rock stable circuit design.

A950RC circuit
We use current regulation method to control the amount of current going through the LED for all output levels. This results in constant brightness output regardless of battery type, LED model, and temperature/voltage change .

This circuit utilizes low restrictive passive components and top-notched ICs/FETs to ensure ultra-high efficiency and low drop-out voltage.

Excellent runtime and flat regulation
D25C runs for 150+ hours on its lowest brightness level. The current regulated circuit design allows constant output throughout its runtime for all output levels without PWM-flicking.

At highest brightness level, D25C current regulates for 0.9 hours using a single CR123A battery.

The current regulation control method allows the just right of amount of current going through the LED. This results in constant brightness output regardless of battery type, LED variation, and temperature change.


Clicky on/off switch & Twisty head

Easy on/off operation
Press the switch button until it clicks to turn on the flashlight. To switch off the light, press the switch again until it clicks.

Output adjustable
Half press the switch button to switch to next output level. With the head loose, AUX hidden modes are available after you repeat two sets of regular low-med-high output. Loose the head for group one output, and tighten the head for group two output.

Programmable settings
1) Moonlight output (disable by default) - disable or enable the moonlight output. The entire output range of the group 1 output will be shifted to a brighter output set or a dimmer output set accordingly. Toggle this setting starting with head loosen, turn on the light, and then repeat tight and loose for three times.

2) Mode memory - remebers the last output of the group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times.

Turbo boost technology
This is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode. It’s normal for the light to get warm at such level. Do not leave the light running unintended.


We Also Recommend